High Power Line

Direct-Acting Solenoids, Reversible Solenoids



Request a Quote


About the high power line

The LHS and LHR lines excel by small dimensions and low power consumption at maximum stroke movement, short switching times and smooth operation.

These reliable components are used in all areas of engineering – in machine tools and packaging machines, in automatic and office machines, in control and regulation systems – wherever demands on functional safety and reliability are high.

In all solenoid models the solenoid stroke is the line s the armature has travelled from stroke starting position to stroke end position. The stroke starting position is the original position of the armature before the stroke movement starts resp. after the reset is finished. The stroke end position is determined by the solenoid design – it is the position the armature takes due to electromagnetic force.

The magnetic forces indicated are reached at 90% of the nominal voltage and in warmed-up condition. The values for the duty cycles are standard values and refer to the state described above at a load with 70% of the magnetic force of the device.

The products are manufactured and tested according to DIN VDE 0580/07.2000.
With rectifier connector: 230 V AC/40-60 Hz

Duty cycle: 100% ED
Protection class acc. IEC 60529
Thermal class: B
Design subject to change